Open-Circuit Cooling Towers  Service 1
Open-Circuit Cooling Towers  Service 1
Open-Circuit Cooling Towers  Service 1
Open-Circuit Cooling Towers  Service 1

Open-Circuit Cooling Towers Service 1

An Open-Circuit Cooling Tower is a prevalent industrial cooling solution where water is cooled through direct contact with air. In this design, water cascades over a fill while air flows through it, allowing heat to be rejected from the water via evaporation and sensible heat transfer.

Email: yubk@lydrev.com

Description

  • An open-type cooling tower, also known as an "open-circuit cooling tower" or "direct-contact cooling tower," has a core technical principle: "Water directly contacts air, and circulating water is cooled mainly through evaporative heat dissipation, supplemented by sensible heat transfer."

    Its Working Process
    1. Hot Water Spraying and Distribution
    Circulating hot water that requires cooling is pumped to the water distribution system at the top of the cooling tower. It is evenly sprayed downward through nozzles or a rotating water distributor.
    2. Formation of Heat Exchange Surface
    The sprayed hot water falls onto the fill pack layer. The fill pack serves to greatly increase the contact surface area and contact time between water and air. On the surface of the fill pack, hot water forms a thin water film or is dispersed into countless tiny water droplets.

    detail-1
  • 3. Forced Ventilation and Heat-Mass Exchange
    A fan forces cold, dry ambient air to be drawn in from around the tower body, making it flow countercurrently or cross-currently with the hot water flow in the fill pack layer. During this process, sufficient heat and mass exchange occurs between the two:
    Evaporative heat dissipation (latent heat exchange - primary method): Some water molecules absorb enough heat to evaporate and turn into water vapor. This phase change process absorbs a large amount of heat (latent heat of vaporization), which is directly removed from the remaining liquid water. This is the most important way to reduce water temperature (accounting for approximately 60%-80% of the total cooling capacity).
    Contact heat dissipation (sensible heat exchange): Due to the temperature difference between hot water and air, heat is transferred from hot water to air through conduction and convection, increasing the air temperature.

    4. Cycle Completion
    Cooling water collection: After heat exchange, the water (with reduced temperature) drips into the water collection pan at the bottom of the tower. It is then pumped back to the system that needs cooling for cyclic reuse.

    detail-2
  • detail-18
  • detail-19
  • detail-20

Fill in Your Requirements

    • Name:

    • *Email:

    • Country:

    • Tel/WhatsApp:

    • *Message:

    Related Product

    Home Tel Mail Inquiry