Evaporative condensers for steam service 2
Evaporative condensers for steam service 2
Evaporative condensers for steam service 2
Evaporative condensers for steam service 2

Evaporative condensers for steam service 2

Transform your steam condensation process with our integrated evaporative condenser. This innovative unit replaces the conventional array of condensers, cooling towers, and circulating pumps with a single, skid-mounted system. The key advantages of this consolidated design include a significantly reduced physical footprint, expedited installation, and enhanced resource efficiency—demonstrating verified reductions of 20%-40% in water and 10%-20% in power consumption. It represents the modern, high-performance choice for system upgrades.

Email: yubk@lydrev.com

Description

  • The evaporative condenser is specialized equipment developed for the direct condensation of water vapor. It replaces the traditional configuration of water-cooled systems, which consists of a surface condenser, a mechanical draft cooling tower, and associated circulating water pipelines and pumps. By shifting the heat transfer mechanism from sensible heat exchange to latent heat exchange, it achieves the goals of water conservation, energy savings, and improved efficiency.

    The unit primarily comprises a heat exchange module, a recirculating water system, an air supply system, a vacuum system, and a condensate system. During operation, driven by the fan, the evaporation of the water film outside the tubes absorbs the heat released by the condensing steam inside the tubes. This process is characterized by latent heat transfer, where heat and mass transfer occur simultaneously.

    Evaporative-condensers-for-steam-5
  • The working principle is as follows:

    1.The cooling water is pumped to the top of the heat exchange module and evenly sprayed over the external surface of the heat exchange tubes via nozzles, forming a uniform water film.

    2.Steam enters the heat exchange module through the equipment inlet and is naturally distributed to each individual heat exchange tube.

    3.Phase change occurs simultaneously on both sides of the tube walls: steam condenses and releases heat inside the tubes, while sprayed water evaporates and absorbs heat outside the tubes. Phase change represents the most efficient heat transfer process.

    4.The condensed steam is collected via pipelines into the condensate tank, while any non-condensable gases generated are extracted and discharged by the vacuum system.

    5.The evaporated water film, under the forced draft of the fan, transfers its heat to the air in the form of saturated vapor.

    Evaporative-condensers-for-steam-6
  • detail-4
  • detail-5
  • detail-6

Fill in Your Requirements

    • Name:

    • *Email:

    • Country:

    • Tel/WhatsApp:

    • *Message:

    Home Tel Mail Inquiry