Closed Circuit Cooling Towers Service 2
Closed Circuit Cooling Towers Service 2
Closed Circuit Cooling Towers Service 2
Closed Circuit Cooling Towers Service 2

Closed Circuit Cooling Towers Service 2

Unlike open towers, our closed-circuit cooling tower physically separates the process fluid from the atmosphere. This closed-loop integrity is key to avoiding contamination-related issues like corrosion and clogging, securing uninterrupted and sustainable performance.

Email: yubk@lydrev.com

Description

  • As shown in the figure below, the Closed-Circuit Cooling Tower is mainly composed of a heat exchange module, a water circulation system, an air supply system, and a frame.

    Using the Closed-Circuit Cooling Tower as the heat exchange equipment for the process system has the following characteristics:
    a) High efficiency: The Closed-Circuit Cooling Tower mainly uses the latent heat of vaporization of water for heat exchange. Its heat exchange effect depends on the local wet-bulb temperature. Compared with traditional condensing methods, the heat exchanger outlet temperature is lower and more stable.

    detail
  • b) Water saving: The circulating water of the Closed-Circuit Cooling Tower only needs to ensure uniform water distribution on the surface of the heat exchange tubes, and the circulating water volume is approximately 1/4 to 1/3 of that of water-cooled circulation systems. The Closed-Circuit Cooling Tower is fully enclosed and forms a slight negative pressure state under the action of the fan. It has a low evaporation temperature and large latent heat, and the high-efficiency water collector has a good water collection effect, reducing system water consumption.
    c) Electricity saving: The Closed-Circuit Cooling Tower has a small circulating water volume and low lift, so the power of the circulating water pump is significantly lower than that of traditional condensing systems.
    d) Less affected by the ambient temperature field and wind field: The air supply system adopts the induced draft type, which has an obvious effect on resisting ambient crosswind.
    e) High degree of automation: It can adjust the fans and water pumps according to changes in ambient temperature to achieve energy-saving effects.

    detail-1
  • detail-17
  • detail-15
  • detail-16

Fill in Your Requirements

    • Name:

    • *Email:

    • Country:

    • Tel/WhatsApp:

    • *Message:

    Related Product

    Home Tel Mail Inquiry